SunQuest Pro 16SE Tanning Bed - Replacement Lamps
The SunQuest Pro 16SE Tanning Bed was originally equipped with Wolff Golden Tan lamps and new certified replacements are the Radiance 5000 lamps with 5% UVB at this page:
If you are looking for another alternative lamp with a higher UVB level or shorter session time than the original lamps you can select any of the following for your SunQuest Pro 16SE Tanning Bed and they will work in the bed:
Radiance 7000 with 6.5% UVB https://suntanningstore.com/collections/replacement-lamps/products/radiance-7000-f71-bi-pin-100w-6-5-uvb-tanning-lamps
Radiance 8000 with 7.5% UVB https://suntanningstore.com/collections/replacement-lamps/products/radiance-8000-f71-bi-pin-100w-7-5-uvb-tanning-lamps
Radiance 9000 with 8.5% UVB https://suntanningstore.com/collections/replacement-lamps/products/radiance-9000-f71-bi-pin-100w-8-5-uvb-tanning-lamps
Your tanning unit is designed with a maximum timer setting and a specific lamp type in order to prevent the user from being exposed to excessive ultraviolet light. The original lamps are listed on the exposure label attached to the system or in the user manual and when used in combination with the timer on your system they insure a user is not exposed to excessive UV light during a tanning session. However, you may always retrofit your bed with a new replacement lamp of your choice but if you do please be ware of the strength of your new lamps and not exceed the stated session times so you do not exceed the maximum daily UV radiation exposure limit set by the FDA.